Model no. SAKI-2000INTRODUCTION
The SAKI powerful and automatic pot Stirrer ensures you no more burning food
again! It has different speed options leave your pots unattended without risk of
burning, enhances the quality of stews, soups, sauces, porridge and risottos. It is
extremely easy to use and easy to clean. The removable arms allow it to fit
comfortably in your dishwasher and allow for compact storage when you’re not
using the stirrer. It’s powerful motor with long lasting battery. You will be very happy
when you use it everyday in the kitchen!
What is included with your stirrer
- Stirrer motor unit with battery plug.
- Stirrer bridge
- Stirrer Axle
- Stirrer Blade
- Stirrer charger
- User Manual
GETTING STARTED
The only preparation needed is to remove the battery plug from
the charging socket. This connects the battery to the electronics
making it possible to use the stirrer.
Using the stirrer
- Adjust the stirrer blade size according to your pot. The SAKI
Automatic Pot Stirrer fits most pots. The stirrer blade is
adjustable and make sure the stirring blade you adjusted that
best fits your pot. The blades flex to fit most diameters from
15cm to 25cm. The axle is flexible so it will automatically
adapt to your pot height.
2. After adjust to the right stirring blade attach the axle by pressing it in place.
4- Insert the axle and stirrer blade into the pot. You can do this either before or after adding food. The stirring blade will sit slightly above the pot bottom, and may lean slightly to the side. Do not worry as this will straighten itself and align with the bottom once the motor unit is attached and blades start turning. If you insert the blades after adding food twist the stirring blade into the pot as far as possible until it reaches the bottom. The blades will “ dig into the food” once the motor unit is attached and starts turning.
5- Attach the bridge while ensuring that axle comes through the
center hole. Use your thumb and remaining fingers to
squeeze open the clamp on both sides to place the bridge
over the pot edge. Make sure you press the bridge thoroughly
down so the surface of the bridge touches the pot edge.
6- Let go of the clamp and it will fasten around the pot edge and
secure the bridge firmly.
7- Attach the motor unit by placing it in the bridge motor cradle
and twisting slightly counterclockwise. When the motor unit
“point”aligns with the bridge direction it is correctly placed.
8- You are ready to stir!
9- To start stirring simply press the On/Off button. The unit
starts at the speed it was set to last time it was in use.
10- To alternate between high or low speed simply press
the speed toggle button.
11- The LED light indicates if you start to run out of battery.
In this case the unit will also make an alarm sound. To stop
the alarm insert the charging plug in the motor unit’s charging
socket. The alarm will stop if press on/off to stop the stirrer.
12- To stop the stirrer simply press the On/Off button again
13- Remove the motor unit by turning it clockwise and
lifting it up from the bridge.
14- Remove the bridge from the casserole by squeezing the
clamping mechanism on both sides and lifting it off the
casserole.
15- Carefully lift the stirring blade out of the casserole
holding the axle. Be careful of dripping hot food.
Charging the motor unit
To charge the motor unit insert the charging plug into the
motor unit’s charging socket and insert the charger into the outlet.
If you have inserted the charger plug into the cradle simply put the
motor unit into the cradle making sure the charger is plugged to the
outlet.
The red light will light. When fully charged the LED will change to
green.
Charge for about 4 hours. The unit will stir for about 2 hours
(dependent on the viscosity of the food being stirred).
HOW TO CLEAN YOUR STIRRER
MOTOR UNIT: Wipe with damp cloth. Do not submerge in
water or put in the dishwasher.
BRIDGE AND STIRRING BLADES: Can be washed in the
dishwasher. Recommended max temperature is 60 degrees.
CRADLE: Can be washed in the dishwasher if the charger is
disassembled from it. Recommended max temperature is 60
degrees. Never wash the charger!
AXLE: Can be washed in the dishwasher. Recommended max
temperature is 60 degrees. For best cleaning of the axle we
recommend you disassembled it.
At SAKI we are very safety conscious. We design and manufacture consumer products with the safety
of you, our valued customer, foremost in mind. In addition we ask that you exercise a degree of care
when using any electrical appliance and adhere to the following precautions. Misuse can cause
potential injuries.
IMPORTANT SAFEGUARDS
This appliance is for HOUSEHOLD USE ONLY.
READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE
- This is not a toy. Keep away from children. Use only for
intended purpose and follow the instructions carefully.
Dispose of in an orderly manner.
- Never lift the casserole by the bridge! It may cause serious
injury. Always use the pot’s designated handles for moving
the pot!
- If the charging cable or the red battery plug is not inserted
in the motor unit the battery will over time (3-4months)
empty itself. When it reaches critical level an alarm will
sound.
- To stop the alarm either insert the charging plug or
9 www.sakikitchen.com
the red battery plug in the charging socket again. This will
disconnect the battery and stop the buzzer. If this is not
done the unit will buzz for several days before the unit
stops. This may damage the battery permanently.
- Always store the motor unit with either the charging plug
or the red battery plug inserted in the charging socket.
The charger does not need to be plugged into the outlet to
stop the battery from emptying.
- If the unit stops at the lowest speed either add more fluid
to the food, or simply increase to the max speed.
- All gears need some time to run themselves in. The sound
from the stirrer motor unit will decrease after some use.
- Do not leave the bridge on the pot between uses as the
friction rubber material may stick and deform slightly over
time. This will not damage the product or the casserole,
but will make the rubber pads look less delicate.
- Do not drop the motor unit on concrete floors or other
hard surfaces as this may damage the unit.
- Do not expose the bridge handles to direct fire like for
example using a small and very low pot on a large gas flare
as this may damage the bridge. Do not put the stirrer in an
oven.
- Always make sure there is some liquid in the pot before
turning on any heat. Follow your recipe and do not use
excessive heat on ingredients like milk etc.
4.2V- 5W DC
SAKI Kitchen Inc.
Made in China
TO RECYCLE: Use a hammer/screwdriver to remove the top lid
and take out the batteries from the motor housing